INDUSTRIES / FOOD & BEVERAGE
Real-time visibility for Food & Beverage environments
Food and beverage operations move fast. Intenseye helps safety teams detect serious-injury risks across production lines, packaging areas, coolers, and sanitation zones before they lead to incidents or downtime.
50+
high-energy hazards detected out of the box
24/7
on every line and cooler, every shift
~0.8s
to a machine stop at a conveyor or auger
AI SAFETY FOR FOOD & BEVERAGE
Why food & beverage floors are hard to keep safe.
Detect
50+ high-energy hazards, the instant they appear.
Warn & stop
A voice warning, or a machine stop in ~0.8s.
Prove
Leading indicators that show risk falling.
High-speed lines, machine guarding on augers, conveyors, and mixers, wet floors, hot ovens and cold freezers, ammonia refrigeration, confined tanks and silos, and a sanitation shift that removes guards and adds caustic chemicals - all with high labor turnover. That mix is exactly where the serious injuries happen.
Intenseye uses computer vision on the cameras you already run to detect the unsafe acts and conditions that cause them, in real time: warning workers, stopping machines, and proving risk is falling across every line and shift.
WHERE THE SIFs COME FROMFour hazards drive the worst
Four hazards drive the worst
injuries - Intenseye sees them coming.
We act on the leading signal, the unsafe act, the moment it happens – not the lagging injury report that only counts people after they're hurt.
USE CASES ON THE FLOOR
The use cases that matter in a food & beverage plant.
50+ detections, organized the way plant safety teams think - from processing and packaging to the sanitation shift. Pick a scenario to see what Intenseye watches, and why each one matters on a real floor.
Categories
8
Categories
32
Hazard types
Machine guarding
Learn more Detects the reach-in toward an auger, conveyor, or mixer and triggers a machine stop before contact.
Hazards detected
- Reach-in at unguarded augerCRITICALHand toward an exposed auger or screw.
- Hand near mixer / blenderCRITICALHand inside a mixer or blender hazard zone.
- Clearing jam on moving lineCRITICALJam cleared without stopping the line.
- Guard removed during runCRITICALFixed guard removed while equipment runs.
THE DIFFERENTIATORMost safety AI just watches.
Most safety AI just watches.
Intenseye steps in.
A worker reaches into an industrial mixer. Same hazard, same instant - but observation only logs the risk. Intervention prevents the injury.
Observe-only AIJust watches
Steps inThe moment
Reach-in at a running mixer logged “for review.”
Reach-in detected in real time - response starts instantly.
Worker warned
No warning reaches the floor.
Sentinel Speaker calls the hazard out - the worker pulls back.
Machine response
The machine keeps running - nothing is halted.
Hard Stop halts the machine in ~0.8s - before contact.
Follow-up
The hazard stays open until someone reviews it.
A corrective action is created, owned, and tracked to done.
Outcome
Stops at a notification.
Prevents the injury.
YOUR CAMERAS OR OURS
Flexible coverage for every environment
Sentinel Hub offers universal compatibility, connecting seamlessly with both Sentinel devices and your existing CCTV. Start fast with the setup you already have, and expand anytime with flexible options.
SENTINEL
YOUR CCTV
Core
Thermal
Depth
Dome
Bullet
PTZ
SENTINEL HUB PRO
ON-SITE AI
RECOMMENDED FOR THIS ENVIRONMENT
Hardware tuned to the food & beverage plant.
Intenseye runs on the CCTV you already own. Where a standard camera can't see - inside a conveyor guard, in a cold dock, at an oven - purpose-built Sentinel devices fill the gap. F&B needs broad coverage first, with guarding close behind.
Explore all Sentinel hardwareCoverage & edge computeSentinel Core / Hub Pro Wide-area coverage across processing, packaging, and the warehouse.3D machine guardingSentinel Depth Sees reach-in at augers, conveyors, mixers, and slicers in true 3D.
Sub-second machine stopHard Stop Halts the line in ~0.8s the instant someone reaches in.Heat, cold & early fireSentinel Thermal Sees hot-surface exposure at ovens and fryers and early-stage fire.PROOFOur customers measure success
Our customers measure success
in injuries that didn't happen.
01The challenge
Across high-speed bottling and warehouse operations, Swire Coca-Cola needed to see and act on unsafe acts in real time — and prove progress toward cutting its Total Incident Rate 50% by 2030.
Target 2030
50%
Total Incident Rate — the company goal Intenseye tracks against
02What Intenseye did
Intenseye went live on the cameras already in the plants, detecting unsafe acts and conditions in real time and routing them to the team — turning a flood of raw alerts into prioritized, reviewable risk.
15,334 alerts resolved
03The outcome
Hazard detections fell 60%+ in 2022, the Lost Day Rate dropped 27% within a year — and workers began putting on reflective vests without being asked.
27%
Lost Day Rate in one year
60%
Hazard detections in 2022
Read the full storyAfter Intenseye was implemented, everyone started putting on their reflective vests without being asked. We can already see the system is having a positive influence on safety behavior.
INTEGRATIONSConnect to the systems
Connect to the systems
your team already uses.
Stream real-time safety intelligence into your EHS platform, analytics tools, and daily workflows to keep every system aligned with the latest safety data.
- Automate safety alerts, incidents, tasks, and analytics.
- Embed AI safety observations into existing EHS workflows.
- Surface the highest-priority risks automatically.
- Track urgent concerns and emerging hazard trends at a glance.
REGULATORY & COMPLIANCE
Built around the standards your plant already answers to.
Intenseye's detections map directly to the OSHA standards that drive citations and SIFs in food & beverage - and the leading-indicator record shows what happened and what you did about it.
1910.147
Control of hazardous energy (LOTO)
Detect entry to un-isolated equipment at sanitation and changeover - the highest-risk window.
1910.212
Machine guarding
Flag missing guards and reach-in at augers, conveyors, mixers, and slicers.
1910.178
Powered industrial trucks
Capture forklift–pedestrian proximity, over-speed, and right-of-way conflicts.
1910.22 / .23
Walking-working surfaces
Flag wet floors, spills, and slip-trip-fall hazards in wash-down and processing.
1910.146
Permit-required confined spaces
Monitor entry to and occupancy of tanks, silos, and vats.
1910.132 / .138
PPE & hand protection
Verify gloves, hairnets, and frocks in product-contact and processing zones.
1910.119
Process safety (PSM)
Support ammonia-refrigeration safe-work monitoring, where applicable.
1910.1200
Hazard communication
Flag unsafe handling of caustic sanitation chemicals on the off-shift.
Informational mapping - not legal advice. Standards cited are US OSHA general-industry references.
EXPLORE OTHER INDUSTRIES
Deployed for safety across heavy industry.
RESOURCES
Go deeper on safety
SIF Thought Leadership Report
Download PDF
Mastering SIF Prevention Through Real-Time Safety Management
Download PDF
FAQ
Your questions, answered.
Built for EHS and operations leaders. Still have a question?
Does Intenseye work with our plant & cold-storage cameras?
Yes - about 90% of IP cameras across 200+ brands, out of the box, including cold storage. Add Sentinel only where a normal camera can't see - Depth for guarding, Thermal for ovens and refrigeration.
How does it prevent an amputation at a conveyor or auger?
It detects the reach-in or jam-clearing motion the instant it happens, warns the worker, and can trigger Hard Stop to halt the line in about 0.8 seconds.
Can it cover the sanitation shift & LOTO?
Yes - the off-shift is the highest-risk window. Intenseye flags entry to equipment that should be isolated, guards-off-energy-live conditions, and unsafe chemical handling, 24/7.
Does it help with slips on wet floors & hygiene/PPE?
Yes - it detects standing water, spills, and slick surfaces, and verifies hygiene PPE like gloves, hairnets, and frocks in product-contact zones.
Do you use facial recognition?
No. Everything is processed on-site, anonymized, with no facial recognition or biometric identification - SOC 2 Type II.
How fast do results show?
Most plants see measurable risk reduction in under six months - fewer unsafe acts, fewer recordables, and an audit-ready leading-indicator record.
SEE IT ON YOUR FLOOR
See what Intenseye can do across your operations.
Meet with our team to explore how Intenseye can help detect your top safety risks, prioritize the use cases that matter most, and bring real-time visibility to the areas where incidents are most likely to happen.